Downhole Products Grippy Cable Clamp is a cable clamp designed to fit over the coupling to convey and secure cables and control lines in and out of well-bores quickly, safely and efficiently.
Features/Benefits
Re-usable galvanized cable clamp
Carbon steel construction (ASTM A1011 CS Type B) and can withstand temperatures up to 400°F
Each collar is designed with a rechargeable “Four Point Friction Pad Gripping System” engineered to meet API pipe spec so there is no over-gripping of the cable
The deformation of the “Flat” friction pads during installation prevent damage to the cable / bundle while resisting slipping and rotation
Designed to provide positive protection of cable between coupling and casing which extends the life of the control line/cable
Triple Progressive Indents are designed on both ends of the channel to grip cables more efficiently. The top indent is slightly less pronounced than the last providing uniform compression
Swan Neck Design on the channel allows a smooth transition of cable over the coupling. The channel length aids in eliminating crimping of cable and damage sharp edges associated with the coupling.
Two heavy duty Hinge Pin Flanges make contact with the tubular adding an additional contact point for optimum “Gripping” and protection.
All Hinge Pin seams are welded to enhance overall integrity of the assembly. The hinge design allows for quick and easy installation.
Options
Bespoke designs available for various cable configurations.
Available in size ranges from 2-3/8” through to 7”
Configured for both round and flat ESP cables, SSV’s, DHSV’s, chemical injection lines, smart well TEC’s (Tubing encapsulated Capillary) and fibre optics.
Features/Benefits
Re-usable galvanized cable clamp
Carbon steel construction (ASTM A1011 CS Type B) and can withstand temperatures up to 400°F
Each collar is designed with a rechargeable “Four Point Friction Pad Gripping System” engineered to meet API pipe spec so there is no over-gripping of the cable
The deformation of the “Flat” friction pads during installation prevent damage to the cable / bundle while resisting slipping and rotation
Designed to provide positive protection of cable between coupling and casing which extends the life of the control line/cable
Triple Progressive Indents are designed on both ends of the channel to grip cables more efficiently. The top indent is slightly less pronounced than the last providing uniform compression
Swan Neck Design on the channel allows a smooth transition of cable over the coupling. The channel length aids in eliminating crimping of cable and damage sharp edges associated with the coupling.
Two heavy duty Hinge Pin Flanges make contact with the tubular adding an additional contact point for optimum “Gripping” and protection.
All Hinge Pin seams are welded to enhance overall integrity of the assembly. The hinge design allows for quick and easy installation.
Options
Bespoke designs available for various cable configurations.
Available in size ranges from 2-3/8” through to 7”
Configured for both round and flat ESP cables, SSV’s, DHSV’s, chemical injection lines, smart well TEC’s (Tubing encapsulated Capillary) and fibre optics.
