The Humidity Guarantee Apparatus is designed for environments of low humidity below the required 25 grains per pound of dry air (required by ASTM for D2699 and D2700). The device installs into the Intake Air Refrigeration Unit Model 8042. It replaces the standard air filter and provides a fine mist to the plenum of the IAR Unit. This apparatus include a bypass valve to redirect a portion of coolant flow from the plenum to increase the cooling effect at the carburetor.
Features
Delivers required moisture to the IAR Plenum
Water delivery is 0.06 gal/min (227 ml/min)
Excess water is returned to a drain for recovery
Case material: 6.36 mm Polyvinyl Plastic
Water Line Material: 9 feet (2.74 m) x 1/4 inch (6.36 mm) Teflon plastic line connected to brass fittings and copper tubing
Mist Nozzles: Dual nozzles have a removable screen cage (120-mesh) that can be cleaned or replaced. Mist is atomized at 60-100 micron droplets
Air Filter is removable and is an automotive standard
Can be connected to engine cooling water without additional valves
Related Equipment: Model SA-14305 Specific Humidity Indicator Kit
Features
Delivers required moisture to the IAR Plenum
Water delivery is 0.06 gal/min (227 ml/min)
Excess water is returned to a drain for recovery
Case material: 6.36 mm Polyvinyl Plastic
Water Line Material: 9 feet (2.74 m) x 1/4 inch (6.36 mm) Teflon plastic line connected to brass fittings and copper tubing
Mist Nozzles: Dual nozzles have a removable screen cage (120-mesh) that can be cleaned or replaced. Mist is atomized at 60-100 micron droplets
Air Filter is removable and is an automotive standard
Can be connected to engine cooling water without additional valves
Related Equipment: Model SA-14305 Specific Humidity Indicator Kit
