The Set-A-Seat™ tool is a revolutionary pump-down baffle that leaves the largest ID possible in the casing for optimum flowback. Like the conventional frac plug method, it is placed in the casing string using a conventional Baker or a Go Shorty Hydraulic Setting Tool on wireline. This patent-pending tool is the latest technology developed by Peak Completions.
The tool is used with Peak’s proprietary line of Fantom® dissolvable frac balls and eliminates the need to mill out after treatment. The Set-A-Seat™ allows a minimally restricted flowback of the reservoir and wellbore, as well as full 10,000 psi differential between stages.
The Set-A-Seat™ isolates the stage above it by using a large OD frac ball placed where the conventional composite plug would normally be. Once the ball is dissolved, the tapered front and back ends allow for conventional coiled tubing clean out tools to be run in and out of the tool without fear of hanging up or having to switch to slim hole BHA configurations.
The tool is made out of the same drillable, erosion-resistant material as our frac seats. This gives operators the opportunity to mill out if necessary since it is completely drillable and contains less than 45% of the material of a conventional composite plug - 10 lbs of iron, compared to 24 lbs of composite.
PRODUCT HIGHLIGHTS
Largest ID possible in casing for flowback
Contains less than 45% material than composite plug
Eliminates the need for mill outs after treatment
Ability for full 10,000 psi bottom-hole differential pressure between stages
Isolates the stage above with large OD dissolvable frac ball
DESIGN FEATURES
Compact design
Tapered leading and trailing edges for coiled tubing clean out
Made out of drillable materials for easy mill out
Utilizes a high bypass area
Dual anti-preset design
The tool is used with Peak’s proprietary line of Fantom® dissolvable frac balls and eliminates the need to mill out after treatment. The Set-A-Seat™ allows a minimally restricted flowback of the reservoir and wellbore, as well as full 10,000 psi differential between stages.
The Set-A-Seat™ isolates the stage above it by using a large OD frac ball placed where the conventional composite plug would normally be. Once the ball is dissolved, the tapered front and back ends allow for conventional coiled tubing clean out tools to be run in and out of the tool without fear of hanging up or having to switch to slim hole BHA configurations.
The tool is made out of the same drillable, erosion-resistant material as our frac seats. This gives operators the opportunity to mill out if necessary since it is completely drillable and contains less than 45% of the material of a conventional composite plug - 10 lbs of iron, compared to 24 lbs of composite.
PRODUCT HIGHLIGHTS
Largest ID possible in casing for flowback
Contains less than 45% material than composite plug
Eliminates the need for mill outs after treatment
Ability for full 10,000 psi bottom-hole differential pressure between stages
Isolates the stage above with large OD dissolvable frac ball
DESIGN FEATURES
Compact design
Tapered leading and trailing edges for coiled tubing clean out
Made out of drillable materials for easy mill out
Utilizes a high bypass area
Dual anti-preset design
