The P636 Snapset II Compression Set Single String Isolation Packer used in multi-zone completions. The Snapset II Packer is used where high differential pressures above the packer are not expected. The Snapset II sets in compression with a lower anchor style packer below. The collet in the lower end of the tool shifts at a pre-determined value to energize the packing elements and set the upper slips. To release, straight pick-up on the tubing string is required.
FEATURES:
Compensating piston hold down system
Running by-pass
Equalizing system
Keyed for rotation thru packer
Internal collet to prevent pre-set
3 element packing system
Sequential release slip system