HIGH PRESSURE HIGH TEMPERATURE HPHT ECP TOOLS ARE DESIGNED FOR PERMANENT ZONE ISOLATION UNDER EXTREME SUBSURFACE WELL CONDITIONS
These tools are incorporated into casing strings much like standard ECP Assemblies, but have the added feature allowing packer inflation fluid to be conveyed downhole in a separate chamber incorporated within the tools. The chamber is pre-filled with a resin that converts into a solid mass after packer setting occurs.
FEATURES
Rated to 12,000 psi differential pressure depending on whether it is cased or open hole
600 degrees f (315 c) temperature rating
Unrestricted full bore
Long 4 foot (1.22 m)or 10 foot (3.05 m) seal element for effective isolation
Clean uncontaminated packer setting fluid used
Packer setting fluid solidifies for permanent long term isolation
Packer is hydraulic set using any fluids, including nitrogen, in the casing
Effective zone isolation occurs immediately upon packer setting. No waiting time, multiple tools may be run and set on casing strings
Multiple tools may be run and set on casing strings
System allows selective production or injection when used with sliding sleeves
These tools are incorporated into casing strings much like standard ECP Assemblies, but have the added feature allowing packer inflation fluid to be conveyed downhole in a separate chamber incorporated within the tools. The chamber is pre-filled with a resin that converts into a solid mass after packer setting occurs.
FEATURES
Rated to 12,000 psi differential pressure depending on whether it is cased or open hole
600 degrees f (315 c) temperature rating
Unrestricted full bore
Long 4 foot (1.22 m)or 10 foot (3.05 m) seal element for effective isolation
Clean uncontaminated packer setting fluid used
Packer setting fluid solidifies for permanent long term isolation
Packer is hydraulic set using any fluids, including nitrogen, in the casing
Effective zone isolation occurs immediately upon packer setting. No waiting time, multiple tools may be run and set on casing strings
Multiple tools may be run and set on casing strings
System allows selective production or injection when used with sliding sleeves
