Designed Cements represent Halliburton‘s continuous advancements in cementing technology driven by more than 90 years of experience with increasingly challenging wellbore conditions. Wellbore conditions vary and the slurry design must account for well depth, bottomhole circulating and static temperature, the type and hydrostatic pressure of the drilling fluid, the potential for lost circulation and/or gas migration among many other influential variables. Designed cements are part of the Designed Cementing Solutions™ systems that provide families of slurries designed for major wellbore-condition challenges facing the industry. Since no single slurry, or family of slurries, is ideal for every well condition, choices allow the optimal solution for each combination of conditions and needs. Cement slurries designed for a given well environment can provide optimal zonal-isolation performance. Good zonal isolation is essential to prevent loss of production, control gas migration, provide protection from corrosive formation waters, reduce water production, and improve confinement of stimulation treatments.
BondCem™ Cements
Conventional cementing solution designed to create high levels of shear bond.
EconoCem™ Cements
Economical conventional cementing solution that can be effective for the given environment.
ExtendaSeal™ Cement
Foamed cementing solution designed to create a lower cost foam cement.
FillSeal™ Cement
Foamed cementing solution designed to create a lower cost foam cement when conditions are such that large volumes of foam are required.
FlowStop™ Cement System
FlowStop cements are designed to perform effectively in deepwater areas with potential for shallow water flow or across from other similar problematic zones using specially tuned systems.
FracCem™ Cement
Designed to help seal off fractures assisting in the cements capability to circulate up the annulus using specially designed systems.
GasStop™ Cement
Performs effectively in wells with overpressured zones with the potential for fluid influx into the annulus through unset cement using specially tuned systems.
HalCem™ Cements
Conventional cementing solution designed as a generic solution to be used when no specific problems are expected.
Halliburton LIGHT Cement (HLC)
A versatile, economical filler cementing composition for applications requiring low or variable slurry density.
LifeSeal™ Cements
Foamed cement solution designed for situations where conditions require a cement with greater elasticity, resiliency and the ability to react and respond to cement sheath failure by expanding to seal off unwanted flow should hydrocarbon flow through microannuli or cracks in the cement sheath at any point during the life of the well.
LockCem™ Cement
LockCem™ cement is a proprietary blend of a water-tolerant resin, WellLock® resin system*, with any class of Portland cement.
NeoCem™ Cement
NeoCem™ cement is a low-Portland cement system that delivers high-performance compressive strength, elasticity, and shear bond at a lower density than conventional cement systems.
ReverCem™ Cement
Conventional cementing solution designed to effectively circulate down the annulus forming an annular seal even when pumped backwards.
SentinelCem™ Cement
Specifically designed to cure losses and enable further drilling by achieving early static gel strength; helps achieve zonal isolation by accomplishing intended top of cement.
SteamCem™ Cements
Conventional cementing solution designed to form an effective annular seal under harsh steam-injection or steam assisted recovery conditions.
SteamSeal™ Cements
Foamed cement solution designed to form an effective annular seal in steam-injection or steam assisted recovery conditions.
SwiftCem™ Cements
Foamed cementing solution designed to form an effective annular seal under harsh steam-injection conditions.
ThermaSeal™ Cements
Foamed cementing solution designed to function effectively in high temperature wellbores while providing additional benefits of increased compressibility and elasticity.
Tuned® Light Cement
Designed to perform effectively in wells with where loss of circulation with conventional weighted cement slurries might occur.
VersaSeal™ Cements
Foamed cementing solution designed to be mixed at a wider range of densities than standard foam cements.
For more specifications:
http://www.halliburton.com/en-US/ps/cementing/cementing-solutions/slurries.page?node-id=hfqela4f
BondCem™ Cements
Conventional cementing solution designed to create high levels of shear bond.
EconoCem™ Cements
Economical conventional cementing solution that can be effective for the given environment.
ExtendaSeal™ Cement
Foamed cementing solution designed to create a lower cost foam cement.
FillSeal™ Cement
Foamed cementing solution designed to create a lower cost foam cement when conditions are such that large volumes of foam are required.
FlowStop™ Cement System
FlowStop cements are designed to perform effectively in deepwater areas with potential for shallow water flow or across from other similar problematic zones using specially tuned systems.
FracCem™ Cement
Designed to help seal off fractures assisting in the cements capability to circulate up the annulus using specially designed systems.
GasStop™ Cement
Performs effectively in wells with overpressured zones with the potential for fluid influx into the annulus through unset cement using specially tuned systems.
HalCem™ Cements
Conventional cementing solution designed as a generic solution to be used when no specific problems are expected.
Halliburton LIGHT Cement (HLC)
A versatile, economical filler cementing composition for applications requiring low or variable slurry density.
LifeSeal™ Cements
Foamed cement solution designed for situations where conditions require a cement with greater elasticity, resiliency and the ability to react and respond to cement sheath failure by expanding to seal off unwanted flow should hydrocarbon flow through microannuli or cracks in the cement sheath at any point during the life of the well.
LockCem™ Cement
LockCem™ cement is a proprietary blend of a water-tolerant resin, WellLock® resin system*, with any class of Portland cement.
NeoCem™ Cement
NeoCem™ cement is a low-Portland cement system that delivers high-performance compressive strength, elasticity, and shear bond at a lower density than conventional cement systems.
ReverCem™ Cement
Conventional cementing solution designed to effectively circulate down the annulus forming an annular seal even when pumped backwards.
SentinelCem™ Cement
Specifically designed to cure losses and enable further drilling by achieving early static gel strength; helps achieve zonal isolation by accomplishing intended top of cement.
SteamCem™ Cements
Conventional cementing solution designed to form an effective annular seal under harsh steam-injection or steam assisted recovery conditions.
SteamSeal™ Cements
Foamed cement solution designed to form an effective annular seal in steam-injection or steam assisted recovery conditions.
SwiftCem™ Cements
Foamed cementing solution designed to form an effective annular seal under harsh steam-injection conditions.
ThermaSeal™ Cements
Foamed cementing solution designed to function effectively in high temperature wellbores while providing additional benefits of increased compressibility and elasticity.
Tuned® Light Cement
Designed to perform effectively in wells with where loss of circulation with conventional weighted cement slurries might occur.
VersaSeal™ Cements
Foamed cementing solution designed to be mixed at a wider range of densities than standard foam cements.
For more specifications:
http://www.halliburton.com/en-US/ps/cementing/cementing-solutions/slurries.page?node-id=hfqela4f
