High-energy displacement rates are important for achieving good mud displacement and cement slurry placement. Halliburton cementing units provide fast rig-up time and homogeneous slurries. Our pumping equipment provides industry-leading reliability and performance, enabling efficient cementing operations. The Elite™ trailer is Halliburton‘s most advanced cementing unit and features the FLECS™ control system. Halliburton also has Global Harsh-Environment Trucks with twin HT-400™ pumps on a body load unit with a combined 1,475 horsepower and FLECS Control System designed to reliably mix and displace cement slurry in rugged conditions and harsh environment.
Automatic Density Control (ADC® mixing system)
•UNIPRO™ II computer system provides automatic control over the flow rate of incoming dry material and mixing water (automatic operational mode)
•Two back up systems: (1) electrically overrides the UNIPRO II system with a potentiometer in the control stand (manual electric operational mode); (2) manual system that bypasses the hydraulic system and manually moves the water valve and cement throttling valve (manual mechanical emergency operational mode)
•Signals are received from the 3-in. mixing water flow meter and the 3-in. density meter, adjusting the incoming flow to the correct rate and density
•Allows preprogramming of up to three stages of cement blends
•Accommodates rate, density, and stage changes during the job
RCM® IIIr High-Energy Mixing System
The RCM® IIIr mixer mixes pneumatically conveyed bulk dry cement and cement material with the mixing water for a thoroughly mixed and homogenous slurry.
•Provides a linear relationship and a single control point between valve position and dry bulk material rate and water rate
•Dry cement feed rate controlled by cement throttle valve atop mixer
•Fresh water entry feed rate controlled by a rotary-jet valve located in the mixer
•Cement dust is minimized by the wetting of dust particles before they can escape to the atmosphere
•RCM Tank: Pre-mix compartment of the RCM tank receives the cement slurry, mixing it again with mechanical agitators before returning it back to the RCM IIIr mixer via the re-circulating centrifugal pump
•Designed to re-circulate slurry through Density Sensor and back into mixer to provide higher mixing energy
•Allows re-circulated slurry to mix with the incoming water and cement for more effective mixing
•Diffuses the energy of the re-circulated and newly mixed slurries to minimize air entrainment
BMR 100-Barrel Batch-Mixer Trailer
More safety and ergonomic benefits distinguish this design from our competitors.
Elite™ Cementing Unit
A Trailer unit with Twin HT-400™ Pumps for a combined 1,025 horsepower and the FLECS™ control system.
HT-400™ Pump
The rugged HT-400™ pump is the foundation of many Halliburton cementing and pumping units and is ideal for a variety of cuttings injection projects.
Red Tiger™ Cementing Unit
Body Load Truck with a single HT-400™ pump driven by a 520 horsepower engine. RCM® IIIr mixer and FLECS Control System.
For more specifications:
http://www.halliburton.com/en-US/ps/cementing/land-equipment/land-pumping-equipment.page?node-id=hfqelahx
Automatic Density Control (ADC® mixing system)
•UNIPRO™ II computer system provides automatic control over the flow rate of incoming dry material and mixing water (automatic operational mode)
•Two back up systems: (1) electrically overrides the UNIPRO II system with a potentiometer in the control stand (manual electric operational mode); (2) manual system that bypasses the hydraulic system and manually moves the water valve and cement throttling valve (manual mechanical emergency operational mode)
•Signals are received from the 3-in. mixing water flow meter and the 3-in. density meter, adjusting the incoming flow to the correct rate and density
•Allows preprogramming of up to three stages of cement blends
•Accommodates rate, density, and stage changes during the job
RCM® IIIr High-Energy Mixing System
The RCM® IIIr mixer mixes pneumatically conveyed bulk dry cement and cement material with the mixing water for a thoroughly mixed and homogenous slurry.
•Provides a linear relationship and a single control point between valve position and dry bulk material rate and water rate
•Dry cement feed rate controlled by cement throttle valve atop mixer
•Fresh water entry feed rate controlled by a rotary-jet valve located in the mixer
•Cement dust is minimized by the wetting of dust particles before they can escape to the atmosphere
•RCM Tank: Pre-mix compartment of the RCM tank receives the cement slurry, mixing it again with mechanical agitators before returning it back to the RCM IIIr mixer via the re-circulating centrifugal pump
•Designed to re-circulate slurry through Density Sensor and back into mixer to provide higher mixing energy
•Allows re-circulated slurry to mix with the incoming water and cement for more effective mixing
•Diffuses the energy of the re-circulated and newly mixed slurries to minimize air entrainment
BMR 100-Barrel Batch-Mixer Trailer
More safety and ergonomic benefits distinguish this design from our competitors.
Elite™ Cementing Unit
A Trailer unit with Twin HT-400™ Pumps for a combined 1,025 horsepower and the FLECS™ control system.
HT-400™ Pump
The rugged HT-400™ pump is the foundation of many Halliburton cementing and pumping units and is ideal for a variety of cuttings injection projects.
Red Tiger™ Cementing Unit
Body Load Truck with a single HT-400™ pump driven by a 520 horsepower engine. RCM® IIIr mixer and FLECS Control System.
For more specifications:
http://www.halliburton.com/en-US/ps/cementing/land-equipment/land-pumping-equipment.page?node-id=hfqelahx
