Sperry Drilling’s downhole drilling motors can be configured to answer specific downhole conditions or well designs. Using the latest available technology and materials a wide variety of possible configurations permits the use of SperryDrill® and GeoForce® motors in an extensive range of drilling applications.
•Conventional directional drilling
•Steerable and horizontal drilling
•Performance drilling
•Short/intermediate radius drilling
•Air/foam and underbalanced drilling
•Extended reach
•HP/HT
•Harsh environment
•Shale drilling
•Conductor pipe drill down
•Coiled tubing drilling
•Coring
•Slimhole drilling
•Hole opening
•Hole spudding
•Milling
•Casing drilling
•Medium radius drilling
•Motor + rotary steerable drilling
•Vertical drilling
A range of modular power sections is available to match the motor output to the specific requirements of each project and the style of bit. Sperry offers high-speed motors for drilling in harder formations, where diamond impregnated bits are preferred. For drilling in softer formations where roller cone bits perform well, Sperry has slower speed motors that provide torque while minimizing the number of rotations on the bit bearings for longer life. When drilling with polycrystalline diamond compact (PDC) bits, Sperry has low and medium speed motors with very high torque output for maximum rate of penetration and long life downhole. Power units are available to address a wide range of speed, torque and fluid requirements, including conventional drilling muds, foam and air.
SperryDrill and GeoForce motors can be further configured to suit any drilling environment, balancing the power section with the right lower-end bearing assemblies to enhance performance and reliability.
The SperryDrill/GeoForce XL and XLS series motors are the most powerful and reliable motors in the industry today.
•XL Series motors – higher power, higher torque motor with a rugged mud lubricated bearing assembly
•XLS Series motors – higher power, higher torque motor with a rugged sealed bearing assembly
The XL and XLS series motors deliver unsurpassed performance and reliability including 80 percent more power, 65 percent more torque load, 50 percent increase on operating differential pressure and shorter bit-to-bend distance for improved build rates.
GABI™ Downhole Drilling Motor
Sperry Drilling’s GABI™ motor is equipped with a GABI™ sensor providing at-bit azimuthal gamma ray and inclination measurements for improved geosteering and optimum wellbore placement.
GeoForce® and GeoForce® XL/XLS Enhanced Performance Motors
Hostile downhole environments and difficult drilling conditions demand a combination of performance and reliability. The GeoForce enhanced performance motor with its even-wall power section answers the challenges of harsh downhole conditions by delivering maximum torque and horsepower with unsurpassed reliability.
SperryDrill® and SperryDrill XL/XLS Positive Displacement Motors
The SperryDrill® positive displacement motor operates reliably under a wide range of downhole conditions. With configurations suitable for everything from conventional fluid drilling to air drilling, from standard to high temperature and high pressure environments, from long to short radius, the SperryDrill fleet of motors delivers superior performance in every application.
For more specifications:
http://www.halliburton.com/en-US/ps/sperry/drilling/directional-drilling/downhole-drilling-motors/default.page?node-id=hg98y5ku
•Conventional directional drilling
•Steerable and horizontal drilling
•Performance drilling
•Short/intermediate radius drilling
•Air/foam and underbalanced drilling
•Extended reach
•HP/HT
•Harsh environment
•Shale drilling
•Conductor pipe drill down
•Coiled tubing drilling
•Coring
•Slimhole drilling
•Hole opening
•Hole spudding
•Milling
•Casing drilling
•Medium radius drilling
•Motor + rotary steerable drilling
•Vertical drilling
A range of modular power sections is available to match the motor output to the specific requirements of each project and the style of bit. Sperry offers high-speed motors for drilling in harder formations, where diamond impregnated bits are preferred. For drilling in softer formations where roller cone bits perform well, Sperry has slower speed motors that provide torque while minimizing the number of rotations on the bit bearings for longer life. When drilling with polycrystalline diamond compact (PDC) bits, Sperry has low and medium speed motors with very high torque output for maximum rate of penetration and long life downhole. Power units are available to address a wide range of speed, torque and fluid requirements, including conventional drilling muds, foam and air.
SperryDrill and GeoForce motors can be further configured to suit any drilling environment, balancing the power section with the right lower-end bearing assemblies to enhance performance and reliability.
The SperryDrill/GeoForce XL and XLS series motors are the most powerful and reliable motors in the industry today.
•XL Series motors – higher power, higher torque motor with a rugged mud lubricated bearing assembly
•XLS Series motors – higher power, higher torque motor with a rugged sealed bearing assembly
The XL and XLS series motors deliver unsurpassed performance and reliability including 80 percent more power, 65 percent more torque load, 50 percent increase on operating differential pressure and shorter bit-to-bend distance for improved build rates.
GABI™ Downhole Drilling Motor
Sperry Drilling’s GABI™ motor is equipped with a GABI™ sensor providing at-bit azimuthal gamma ray and inclination measurements for improved geosteering and optimum wellbore placement.
GeoForce® and GeoForce® XL/XLS Enhanced Performance Motors
Hostile downhole environments and difficult drilling conditions demand a combination of performance and reliability. The GeoForce enhanced performance motor with its even-wall power section answers the challenges of harsh downhole conditions by delivering maximum torque and horsepower with unsurpassed reliability.
SperryDrill® and SperryDrill XL/XLS Positive Displacement Motors
The SperryDrill® positive displacement motor operates reliably under a wide range of downhole conditions. With configurations suitable for everything from conventional fluid drilling to air drilling, from standard to high temperature and high pressure environments, from long to short radius, the SperryDrill fleet of motors delivers superior performance in every application.
For more specifications:
http://www.halliburton.com/en-US/ps/sperry/drilling/directional-drilling/downhole-drilling-motors/default.page?node-id=hg98y5ku
