Solids Control solutions engineered for drilling efficiency
We collaborate with you every step of the way to develop the ideal match of technologies and services to optimize your solids control system and maximize fluid performance. We look at all pieces of the system to identify your needs and make recommendations from our extensive portfolio of shale shakers, screens, centrifuges, and cuttings dryers. We strive to increase efficiency and maintain fluid consistency so you can keep your operation running smoothly.
Maximize solids removal and minimize cost
Effectively and efficiently removing solids helps to lower fluid dilution rates and decrease the volume of required additives. This helps reduce the cost of maintaining fluid properties, and can reduce or eliminate the volume of solid and liquid waste that must be transported for disposal. Our expertly trained personnel can design solutions that deliver maximum solids removal to help you minimize your operational expenses.
Improve drilling performance
Maintaining fluid properties helps increase drilling efficiency and overall performance. Predictable fluid densities and rheologies are critical to keep wellbore integrity intact, and effective solids removal is a key component to ensure fluid consistency. Baroid has a range of technologies and services to help you clear solids from your circulating system, so your fluid performs to its maximum potential and your drilling operations run at safe and sustainable rates.
On-the-Fly (OTF) Mixer
The On-The-Fly (OTF) Mixer is a thorough, high-performance fluid blending, portable piece of equipment for your riserless drilling applications.
Centrifuges
Range of decanting centrifuges for optimum performance
Removing drill solids and recovering fluids and weighting agents are effective ways to control fluid performance. With Baroid’s line of decanting centrifuges, these capabilities are built into single, modular units. Whether your operations entail oil-based or water-based fluid systems, onshore or offshore applications, we can customize your centrifuge selections to get the most out of your solids control solutions and deliver exceptional fluid performance.
Discard low gravity solids and maintain fluid consistency
Fixed speed, hydraulic, or variable frequency drive centrifuge options can be applied to your operation to efficiently separate low gravity solids from useful weighting material. Removal of these lighter solids helps maximize the volume of recovered fluid that can be re-used in the active mud system. Our centrifuges can help you maintain consistent fluid density and rheology so you can keep drilling with fluid performance that meets or exceeds your expectations.
Increase efficiency and reduce HSE risk
Our line of fully-automated centrifuges is designed to deliver optimized solids separation and improved visibility into operational performance. Advanced automation capabilities and real-time diagnostics can help you quickly identify areas for performance improvement or maintenance, while remote operations capabilities and access to information can help reduce personnel risk on location.
Cuttings Dryers
Solids and oil separation for environmental compliance
We understand the increasing rigidity of environmental regulations, and we take pride in offering innovative, reliable, and high-performing solutions to help reduce your waste and liability. When cuttings from oil-based fluid projects exit the shakers, oil content can be in excess of 12%. We can identify the right technologies for your rig to help efficiently reduce waste volumes or lower your oil retained-on-cuttings (ROC) to less than 6.9% for on-site discharge in approved locations.
Versatile options for increased efficiency
Every project has unique requirements. A versatile range of cuttings dryers is critical to deliver maximum efficiencies. We have developed three distinct BaraG-Force™ Vertical Cuttings Dryers to satisfy specific requirements, including small footprint applications, high-volume/high-ROP drilling operations, or projects in areas with limited waste management. Regardless of your rig design or location, we can deliver multiple options to help maximize the efficiency of your waste management stream.
Lower cost through lower waste volumes
All of our dryers are designed with the dual purpose of reducing waste volumes and recovering fluids. We can help lower your ROC levels to acceptable discharge limits to reduce or eliminate your waste transportation costs. For zero-discharge environments, the lower oil-on-cuttings means less utilization of expensive off-site treatment or disposal, and recovered fluid can help offset final disposal costs.
Shale Shakers & Screens
Efficiently remove solids and maintain reliability
Removing large solids from drilling fluids is critical to maintaining acceptable fluids properties. We carefully select and qualify every shaker within our comprehensive lineup, and we work directly with you to identify the best solution to fit your operational needs. Our experts can help engineer, install, operate, and maintain the optimum shaker setup for your well to maximize efficiency and ensure reliable operation.
Optimize performance and reduce costs
Pairing the right shaker with high-performance screens can have a dramatic impact on solids control performance. Our unique line of BaraMesh™ shaker screens can be customized to fit virtually any shaker on the market and can provide improved flow rates, superior solids removal, and longer screen life. Our proprietary screen technology can help you improve solids control performance, reduce the number of required screens, and reduce overall screen costs.
BaraMesh™ Shale Shaker Screens
BaraMesh™ shale shaker screens incorporate unique engineering and top quality materials to help improve the efficiency and effectiveness of your solids control systems while protecting your operating budget.
For more specifications:
http://www.halliburton.com/en-US/ps/baroid/drilling/solids-control-equipment-and-services/default.page?node-id=hfyjrruv
We collaborate with you every step of the way to develop the ideal match of technologies and services to optimize your solids control system and maximize fluid performance. We look at all pieces of the system to identify your needs and make recommendations from our extensive portfolio of shale shakers, screens, centrifuges, and cuttings dryers. We strive to increase efficiency and maintain fluid consistency so you can keep your operation running smoothly.
Maximize solids removal and minimize cost
Effectively and efficiently removing solids helps to lower fluid dilution rates and decrease the volume of required additives. This helps reduce the cost of maintaining fluid properties, and can reduce or eliminate the volume of solid and liquid waste that must be transported for disposal. Our expertly trained personnel can design solutions that deliver maximum solids removal to help you minimize your operational expenses.
Improve drilling performance
Maintaining fluid properties helps increase drilling efficiency and overall performance. Predictable fluid densities and rheologies are critical to keep wellbore integrity intact, and effective solids removal is a key component to ensure fluid consistency. Baroid has a range of technologies and services to help you clear solids from your circulating system, so your fluid performs to its maximum potential and your drilling operations run at safe and sustainable rates.
On-the-Fly (OTF) Mixer
The On-The-Fly (OTF) Mixer is a thorough, high-performance fluid blending, portable piece of equipment for your riserless drilling applications.
Centrifuges
Range of decanting centrifuges for optimum performance
Removing drill solids and recovering fluids and weighting agents are effective ways to control fluid performance. With Baroid’s line of decanting centrifuges, these capabilities are built into single, modular units. Whether your operations entail oil-based or water-based fluid systems, onshore or offshore applications, we can customize your centrifuge selections to get the most out of your solids control solutions and deliver exceptional fluid performance.
Discard low gravity solids and maintain fluid consistency
Fixed speed, hydraulic, or variable frequency drive centrifuge options can be applied to your operation to efficiently separate low gravity solids from useful weighting material. Removal of these lighter solids helps maximize the volume of recovered fluid that can be re-used in the active mud system. Our centrifuges can help you maintain consistent fluid density and rheology so you can keep drilling with fluid performance that meets or exceeds your expectations.
Increase efficiency and reduce HSE risk
Our line of fully-automated centrifuges is designed to deliver optimized solids separation and improved visibility into operational performance. Advanced automation capabilities and real-time diagnostics can help you quickly identify areas for performance improvement or maintenance, while remote operations capabilities and access to information can help reduce personnel risk on location.
Cuttings Dryers
Solids and oil separation for environmental compliance
We understand the increasing rigidity of environmental regulations, and we take pride in offering innovative, reliable, and high-performing solutions to help reduce your waste and liability. When cuttings from oil-based fluid projects exit the shakers, oil content can be in excess of 12%. We can identify the right technologies for your rig to help efficiently reduce waste volumes or lower your oil retained-on-cuttings (ROC) to less than 6.9% for on-site discharge in approved locations.
Versatile options for increased efficiency
Every project has unique requirements. A versatile range of cuttings dryers is critical to deliver maximum efficiencies. We have developed three distinct BaraG-Force™ Vertical Cuttings Dryers to satisfy specific requirements, including small footprint applications, high-volume/high-ROP drilling operations, or projects in areas with limited waste management. Regardless of your rig design or location, we can deliver multiple options to help maximize the efficiency of your waste management stream.
Lower cost through lower waste volumes
All of our dryers are designed with the dual purpose of reducing waste volumes and recovering fluids. We can help lower your ROC levels to acceptable discharge limits to reduce or eliminate your waste transportation costs. For zero-discharge environments, the lower oil-on-cuttings means less utilization of expensive off-site treatment or disposal, and recovered fluid can help offset final disposal costs.
Shale Shakers & Screens
Efficiently remove solids and maintain reliability
Removing large solids from drilling fluids is critical to maintaining acceptable fluids properties. We carefully select and qualify every shaker within our comprehensive lineup, and we work directly with you to identify the best solution to fit your operational needs. Our experts can help engineer, install, operate, and maintain the optimum shaker setup for your well to maximize efficiency and ensure reliable operation.
Optimize performance and reduce costs
Pairing the right shaker with high-performance screens can have a dramatic impact on solids control performance. Our unique line of BaraMesh™ shaker screens can be customized to fit virtually any shaker on the market and can provide improved flow rates, superior solids removal, and longer screen life. Our proprietary screen technology can help you improve solids control performance, reduce the number of required screens, and reduce overall screen costs.
BaraMesh™ Shale Shaker Screens
BaraMesh™ shale shaker screens incorporate unique engineering and top quality materials to help improve the efficiency and effectiveness of your solids control systems while protecting your operating budget.
For more specifications:
http://www.halliburton.com/en-US/ps/baroid/drilling/solids-control-equipment-and-services/default.page?node-id=hfyjrruv
